|
Semi-Automation PackageThe Semi-Automation Package combines sample preparation assistance with the viscosity measurements of the DSV. The ARV software interfaces with the analytical balance and provides feedback on the amount of sample added. The operator is instructed to add more sample or less sample, depending on the concentration requirements. Then the operator holds the vial to the syringe pump, which dispenses solvent, and allows time for dissolution. The operator then places the vial in the Autosampler. The DSV system injects the samples and records the viscosity data.
|
The Semi-Automation Package includes the following components:
- Relative Viscometer
- Dual syringe pump
- Degasser
- Data system
- Autosampler
- Analytical balance
- Installation and training
Y501 relative viscometer
Specification |
|
Measuring Principle |
Dual capillary bridge |
Measuring Ranges |
0-20 cp (mPa s) or 1-10 Relative Viscosity |
Sensitivity |
0.0001 Specific Viscosity |
Precision of RV Measurement |
+/- 0.5% relative standard deviation |
Typical Flowrate |
1-3 ml/min |
Typical Analysis Time |
2-4 min |
Typical Sample Volume |
30-35 ml for two injections |
Capillary Dimensions |
0.02" ID x 18" |
Shear Rate |
1000/sec |
Temperature Range |
15-150 degrees C |
Output Signals |
0-10 V |
Dimensions |
17.5" W x 17.5" D x 9.5" H |
Weight |
40 lbs |
Power Requirements |
120 V, 50-60 Hz, 5 A |
microlab 600 dual syringe pump
Specification |
|
Number of Syringes |
2 |
Syringe Volume |
10 ml and 25 ml |
Dimensions |
5.5" W x 7" D x 10.5" H |
Weight |
13 lbs |
erc-3215a degasser
Specification |
|
Number of Channels |
2 |
Dimensions |
2.8" W x 12.2" D x 5.4" H |
Weight |
11.2 lbs |
data system
Specification |
|
Computer Type |
Windows 7 Pro, i3 processor, 4 GB RAM, 200 GB HDD |
Computer Dimensions |
6.9" W x 17.1" D x 14.2" H (Full Tower) |
Monitor |
22" widescreen flatscreen monitor |
Printer Type |
Multifunction (print, scan, copy) inkjet printer |
Printer Dimensions |
17.5" W x 14.5" D x 5" H |
ARV Software |
Version 2.07 |
gilson 223 autosampler
Specification |
|
Sample Tray Capacity |
40 vials |
Vial Volume |
40 ml |
Injection Volume |
10 ml |
Operating Temperature |
15-40 degrees C (uncontrolled) |
Humidity |
35% - 80% non-condensing |
Dimensions |
20.9" W x 17.3" D x 14.6" H |
Weight |
41 lbs |
Power Supply |
100-240 V, 50-60 Hz |
xsr204dr analytical balance
Specification |
|
Maximum Capacity |
220 g /81 g |
Readability |
1 mg/0.1 mg |
Minimum Weight |
82 mg |
Dimensions |
7.7" W x 19.0" D 11.5" H |
Weight |
26 lbs |
